OCD Performance » Fleece Performance
Fleece Performance Categories
Items 1-42 of 42
Items 1-42 of 42
Fleece Performance Products
Air Inlet Elbow
Description: Replace your leaking or corroded heater tubes with our upgraded stainless steel tubes and high temperature silicone hose kit from Fleece Performance. This kit contains everything you need to...More Details »
Item #: FPE-CUMM-SSHCL-12V
Condition:
New
Limited Supply: Only 0 Left!
Price: $379.00
Fuel Feed Line
Description: Replacement high pressure fuel line for 6.6L LML Duramax's with CP3 conversion kits. Features:
Replacement High Pressure Fuel Line for LML CP3 Conversions
Engine Manufacturer: Duramax...More Details »
Item #: FPE-FL-LML-CP3-HP
Condition:
New
Limited Supply: Only 0 Left!
Price: $179.99
Engine Coolant Bypass
Description: Replacement O-ring Kit for all Fleece Cummins Coolant Bypass. When used with MY94 - MY2002 kits, not all O-rings will be utilized.
Kits includes:
3 new square cut O-rings
1 new standard...More Details »
Item #: FPE-CLNTBYPS-CR-ORING-KIT
Condition:
New
Limited Supply: Only 0 Left!
Price: $9.45
Engine Oil Feed Line
Description: Replacement oil feed adapter fitting for our Fleece Performance turbocharger oil feed line kits, FPE-CRTFL-S3S4 and FPE-CRTFL-OE.
Features:
Hose End 1 Size: -6 AN
Fitting Style: AN...More Details »
Item #: FPE-APT-M12-06
Condition:
New
Limited Supply: Only 0 Left!
Price: $13.95
Fuel Pressure Sensor Plug
Description: Replacement connector with 4.5 inch pigtail for use in multiple locations on the Duramax, Ram with Cummins, and other GM vehicles.
Produced in-house, our manufacturing process includes fully...More Details »
Item #: FPE-HAR-MU-PT-1
Condition:
New
Limited Supply: Only 0 Left!
Price: $37.99
Engine Coolant Thermostat Housing Plug
Description: The Fleece Performance replacement thermostat housing with auxiliary port is a direct replacement part for model years 2019-2022 RAM with 6.7L Cummins. The kit includes a port with plug to allow...More Details »
Item #: FPE-CUMM-TH-19
Condition:
New
Limited Supply: Only 0 Left!
Price: $129.99
Fleece Performance Replacement Thermostat Housing with Auxiliary Port RAM with 5.9L and 6.7L Cummins
Engine Coolant Thermostat Housing Plug
Description: The Fleece Performance replacement thermostat housing with auxiliary port is a direct replacement part for model years 1998.5-2007 RAM with 5.9L Cummins and 2013-2018 RAM with 6.7L Cummins. The...More Details »
Item #: FPE-CUMM-TH-1318
Condition:
New
Limited Supply: Only 0 Left!
Price: $129.99
Fuel Pump
Description: The return fuel pressure test port for the 2011-2016 LML Duramax is designed to aid the technician in troubleshooting return fuel pressure, often necessary when diagnosing CP4 pump failures....More Details »
Item #: FPE-FPTP-GM-1116
Condition:
New
Limited Supply: Only 0 Left!
Price: $29.99
Diesel Dual Fuel Pump Pulley
Description: Cummins Dual Pump Spoke Pulley (for use with FPE dual pump bracket) Black
Item #: FPE-34211-BLK-SPK
Condition:
New
Limited Supply: Only 0 Left!
Price: $219.00
Diesel Dual Fuel Pump Pulley
Description: Cummins Dual Pump Spoke Pulley(for use with FPE dual pump bracket) Blue
Item #: FPE-34211-BLU-SPK
Condition:
New
Limited Supply: Only 0 Left!
Price: $219.00
Diesel Dual Fuel Pump Pulley
Description: Cummins Dual Pump Spoke Pulley (for use with FPE dual pump bracket) Orange
Item #: FPE-34211-ORG-SPK
Condition:
New
Limited Supply: Only 0 Left!
Price: $219.00
Diesel Dual Fuel Pump Pulley
Description: Cummins Dual Pump Spoke Pulley(for use with FPE dual pump bracket) RED
Item #: FPE-34211-RED-SPK
Condition:
New
Limited Supply: Only 0 Left!
Price: $219.00
Fuel Hose
Description: All new stainless steel fuel tube nuts from Fleece Performance. Ensure a proper seal on your injector tubes and high pressure injection lines with our high tolerance nuts produced from 300...More Details »
Item #: FPE-CUMM-SSFTN
Condition:
New
Limited Supply: Only 0 Left!
Price: $89.99
Turbocharger
Description: Fleece Performance stainless steel turbo stud kit for S-300 and S-400 turbos. Our studs are produced in the USA from aged 630 stainless steel and feature a 4mm internal hex head for easy...More Details »
Item #: FPE-34856
Condition:
New
Limited Supply: Only 0 Left!
Price: $49.95
Turbocharger
Description: Stainless steel universal coolant level switch for use with the Fleece Performance coolant tank (Part Number: FPE-34235) or custom configuration tanks.
Features a stainless steel body with 1...More Details »
Item #: FPE-FS-UNIV-2M-SS
Condition:
New
Limited Supply: Only 0 Left!
Price: $39.99
Starter Solenoid
Description: Replacement engine starter connector with 6 inch pigtail for use on the 2003-2018 Cummins. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping...More Details »
Item #: FPE-HAR-CUMM-ST-PT-0318
Condition:
New
Limited Supply: Only 0 Left!
Price: $35.99
Fuel Lift Pump
Description: Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has...More Details »
Item #: FPE-SF-CUMM-0304
Condition:
New
Limited Supply: Only 0 Left!
Price: $359.00
Fuel Lift Pump
Description: Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has...More Details »
Item #: FPE-SF-GM-0410
Condition:
New
Limited Supply: Only 0 Left!
Price: $359.00
Fuel Lift Pump
Description: Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has...More Details »
Item #: FPE-SF-CUMM-0509
Condition:
New
Limited Supply: Only 0 Left!
Price: $359.00
Fuel Lift Pump
Description: Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has...More Details »
Item #: FPE-SF-GM-1116-LB
Condition:
New
Limited Supply: Only 0 Left!
Price: $359.00
Fuel Lift Pump
Description: Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has...More Details »
Item #: FPE-SF-GM-1116-SB
Condition:
New
Limited Supply: Only 0 Left!
Price: $359.00
Fuel Lift Pump
Description: Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has...More Details »
Item #: FPE-SF-CUMM-1121
Condition:
New
Limited Supply: Only 0 Left!
Price: $359.00
Coolant Overflow Tank
Description: Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has...More Details »
Item #: FPE-SF-CUMM-9198
Condition:
New
Please Call for Availability
Fuel Lift Pump
Description: Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has...More Details »
Item #: FPE-SF-CUMM-9802
Condition:
New
Limited Supply: Only 0 Left!
Price: $359.00
Fuel Feed Line
Description: Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has...More Details »
Item #: FPE-SF-GM-0104
Condition:
New
Limited Supply: Only 0 Left!
Price: $359.00
Fuel Lift Pump
Description: Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has...More Details »
Item #: FPE-SF-CUMM-2010
Condition:
New
Limited Supply: Only 0 Left!
Price: $359.00
Description: Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has...More Details »
Item #: FPE-SF-CUMM-2024-50
Condition:
New
Limited Supply: Only 0 Left!
Price: $359.00
Steering Tie Rod Reinforcing Sleeve
Description: Problem: The original equipment steering tie rods are prone to collapse under heavy load, making them highly sucsceptible when running larger diameter tires or high offset wheels.
Fix: The...More Details »
Item #: FPE-TIERODSLEEVES-COL
Condition:
New
Limited Supply: Only 0 Left!
Price: $75.99
Turbo Compressor Discharge Adapter
Description: Turbo Compressor Discharge Adapter Kit
Includes
90 degree Discharge Adapater, S400 Vband Compressor Outlet Clamp, O-ring for 90 degree Turbo Commpressor Discharge Adapter.
Item #: FPE-S4TCDA-KIT
Condition:
New
Limited Supply: Only 0 Left!
Price: $60.00
Turbocharger Drain Tube
Description: Replacement turbo drain O-rings for all Fleece Performance turbo oil drain tube kits. Contains two O-rings for the drain adapter that inserts into the engine block and one square cut O-ring for...More Details »
Item #: FPE-CTDT-SERVICE-KIT
Condition:
New
Limited Supply: Only 0 Left!
Price: $4.75
Turbocharger Drain Tube
Description: Eliminate the installation headaches associated with a non-flexible OE drain line with our all new silicone hose drain tube kit. This turbo drain kit is designed for use with all 5.9L Cummins...More Details »
Item #: FPE-CTDT-CW-KIT
Condition:
New
Limited Supply: Only 0 Left!
Price: $94.99
Turbocharger Drain Tube
Description: Eliminate the installation headaches associated with a non-flexible OE drain line with our ALL NEW silicone hose drain tube kit. This turbo drain kit is designed for use with all 2019-Present 6.7L...More Details »
Item #: FPE-CTDT-19-KIT
Condition:
New
Limited Supply: Only 0 Left!
Price: $99.99
Wiring Harness
Description: Our Fleece Performance adapter harness allows the 2004.5-2005 LLY Duramax to run the updated turbo vane position sensor that is used on 2006 and up Garrett turbochargers.
Produced in-house, our...More Details »
Item #: FPE-HAR-DMAX-VPS-ADPT
Condition:
New
Limited Supply: Only 0 Left!
Price: $46.99
Turbocharger Oil Line
Description: Ensure your turbocharger has a good oil supply line with with our replacement turbocharger oil feed line kit designed for use with a Cheetah or stock Holset VGT turbocharger in the factory...More Details »
Item #: FPE-CRTFL-19
Condition:
New
Limited Supply: Only 0 Left!
Price: $69.99
Engine Oil Feed Line
Description: Replacement Turbo Oil Feed Line designed for use with a 1/4 inch NPT inlet turbochargers. The oil feed line is intended for use with S300 or S400 turbochargers mounted in a lower position and WILL...More Details »
Item #: FPE-CRTFL-S3S4
Condition:
New
Limited Supply: Only 0 Left!
Price: $59.99
Turbocharger
Description: Replacement connector with 6 inch pigtail. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to...More Details »
Item #: FPE-HAR-CUMM-SP-PT
Condition:
New
Limited Supply: Only 0 Left!
Price: $36.99
Turbocharger Drain Tube
Description: Our universal 45 degree turbo drain nipple with integrated O-ring seal is designed to fit 7/8 Inch ID Hose. Made from billet aluminum and anodized in black.
Fitment:
Garrett (LLY-LML)...More Details »
Item #: FPE-78HS-45-TDA
Condition:
New
Limited Supply: Only 0 Left!
Price: $34.99
Coolant Hose
Description: Universal fit, preformed 5/8 inch ID hose with 90 degree ends.
Create clean routings and installations with this preformed coolant hose.
See graphic for detailed dimensions.
Item #: FPE-34574-A
Condition:
New
Limited Supply: Only 0 Left!
Price: $24.28
Coolant Hose
Description: Universal preformed 5/8 inch hose with 90 degree ends and T-fitting. Create clean routings and installations with this preformed coolant hose.
Item #: FPE-34257-A
Condition:
New
Limited Supply: Only 0 Left!
Price: $28.84
Coolant Hose
Description: Universal preformed 5/8 inch hose with 90 degree ends and T-fitting (1 inch ID on the T).
Create clean routings and installations with this preformed coolant hose.
See graphic for hose lengths.
Item #: FPE-34258-A
Condition:
New
Limited Supply: Only 0 Left!
Price: $32.23
Wiring Harness
Description: Our Fleece Performance adapter harness allows the early (2007.5-2012) Dodge 6.7L to run the updated turbo actuator that is used on 2013 and up VGT Turbochargers.
VGT Actuator Harness Adapter...More Details »
Item #: FPE-34425
Condition:
New
Limited Supply: Only 0 Left!
Price: $44.95
Pre-Filter
Description: Our Fleece Pre-filters are specially designed to extend the service interval of your air filter when used in heavy dust conditions. Made from a durable polyester material it will stop small dirt...More Details »
Item #: FPE-AFPF-BLK
Condition:
New
Limited Supply: Only 0 Left!
Price: $44.17
Pre-Filter
Description: Our Fleece Pre-filters are specially designed to extend the service interval of your air filter when used in heavy dust conditions. Made from a durable polyester material it will stop small dirt...More Details »
Item #: FPE-AFPF-ORG
Condition:
New
Limited Supply: Only 0 Left!
Price: $44.17
Engine Coolant Bypass
Description: Increased Coolant Flow, Decreased Coolant Temperatures The rear cylinders on the 5.9/6.7L Cummins suffer from a lack of coolant flow, and therefore, experience the highest coolant temperatures....More Details »
Item #: FPE-CLNTBYPS-CUMMINS-12V
Condition:
New
Limited Supply: Only 0 Left!
Price: $359.00
Engine Rocker Arm Bridge
Description: Fleece Performance Billet Rocker Arm Bridges for 1998.5-2018, 24V 5.9L/6.7L Cummins (Set of 12) Features:
These bridges offer a massive 2.5-times strength improvement over the factory...More Details »
Item #: FPE-BRAB-C1
Condition:
New
Limited Supply: Only 0 Left!
Price: $467.43
Transmission Shifter
Description: Replacement coolant bypass house with stainless steel braiding for our Common Rail/VP44 Cummins Coolant Bypass Kits. For use with the following kits:
FPE-CLNTBYPS-CUMMINS-VP-SS...More Details »
Item #: FPE-TAPSHIFTER12
Condition:
New
Limited Supply: Only 0 Left!
Price: $349.99
Auto Trans Torque Converter
Description: Control your torque converter from the palm of your hand with the AlliLocker from Fleece Performance Engineering. The AlliLockeris 100 percent code free and allows you to bypass the TCM to...More Details »
Item #: FPE-ALILKR
Condition:
New
Limited Supply: Only 0 Left!
Price: $179.00
Transmission Shifter
Description: The Fleece Performance TapShifter allows you to shift your 2001-2005 GM Allison Transmission with the touch of a button just like the 2006 and newer trucks.
Perfect for towing, drag racing,...More Details »
Item #: FPE-TAPSHIFTER35
Condition:
New
Limited Supply: Only 0 Left!
Price: $349.99
Engine Oil Feed Line
Description: Ensure your turbocharger has a good oil supply line with with our replacement turbocharger oil feed line kit designed for use with a Cheetah or stock Holset turbocharger in the factory location....More Details »
Item #: FPE-CRTFL-OE
Condition:
New
Limited Supply: Only 0 Left!
Price: $59.99
Engine Coolant Bypass Hose Bracket
Description: 2003-2018 Cummins Coolant Bypass Brackets (Set of two)
Item #: FPE-CLNT-HS-BRKT
Condition:
New
Limited Supply: Only 0 Left!
Price: $69.99
Exhaust Resonator
Description: 2004.5-2010 Duramax Billet Turbo Resonator Delete Plug (LLY/LBZ/LMM)
Item #: FPE-RES-04.5-10
Condition:
New
Limited Supply: Only 0 Left!
Price: $23.80
Turbocharger
Description: The 63mm FMW Duramax VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 2011-2016 Duramax diesels. It comes with a Fleece Performance Engineered 63mm FMW compressor wheel and high...More Details »
Item #: FPE-LML-VNT-63-FMW-N
Condition:
New
Limited Supply: Only 0 Left!
Price: $2,649.00
Coolant Overflow Tank
Description: The Fleece Performance coolant tank replaces the factory coolant tank and moves the location closer to the battery box allowing for more engine compartment space. The tank features an integrated...More Details »
Item #: FPE-34235
Condition:
New
Limited Supply: Only 0 Left!
Price: $389.00
Block Off Plug
Description: 3/8inch Billet Aluminum Universal Block Off Plug
Item #: FPE-34070
Condition:
New
Limited Supply: Only 0 Left!
Price: $6.47
Exhaust Pipe Rain Cap
Description: We couldn't even leave a stack cover alone, we had to upgrade that too! Fleece Performance stack covers are made from heavy duty vinyl and come complete with a properly sized band clamp to ensure a tight fit.
Item #: FPE-STK-CVR-5-45
Condition:
New
Limited Supply: Only 0 Left!
Price: $43.99
Exhaust Pipe Rain Cap
Description: We couldn't even leave a stack cover alone, we had to upgrade that too! Fleece Performance stack covers are made from heavy duty vinyl and come complete with a properly sized band clamp to ensure a tight fit.
Item #: FPE-STK-CVR-6-45
Condition:
New
Limited Supply: Only 0 Left!
Price: $44.99
Exhaust Pipe Rain Cap
Description: We couldn't even leave a stack cover alone, we had to upgrade that too! Fleece Performance stack covers are made from heavy duty vinyl and come complete with a properly sized band clamp to ensure a tight fit.
Item #: FPE-STK-CVR-7-45
Condition:
New
Limited Supply: Only 0 Left!
Price: $45.99
Exhaust Pipe Rain Cap
Description: We couldn't even leave a stack cover alone, we had to upgrade that too! Fleece Performance stack covers are made from heavy duty vinyl and come complete with a properly sized band clamp to ensure a tight fit.
Item #: FPE-STK-CVR-8-45
Condition:
New
Limited Supply: Only 0 Left!
Price: $47.99
Exhaust Stack Cover
Description: 5 inch 45 Degree Hood Stack Cover
Item #: FPE-HSC-5-45
Condition:
New
Limited Supply: Only 0 Left!
Price: $40.99
Exhaust Stack Cover
Description: 5 inch Straight Cut Hood Stack Cover
Item #: FPE-HSC-5-S
Condition:
New
Limited Supply: Only 0 Left!
Price: $40.99