SunCoast Diesel ALTO 4L60/65/70E REBUILD KIT - SC-057905HPPWRSK

This 4L60E Rebuild kit Includes the Following:

• NEW 4L60E OVERHAUL KIT
• ALTO RED EAGLE CLUTCH KIT WITH POWERPACKS
• HIGH PERFORMANCE KOLENE STEEL KIT
• NEW 4L60E FILTER
• NEW 4L60E BUSHING KIT
• NEW 4L60E THRUST WASHER KIT 

This is a complete 4L60E super rebuild kit containing Alto Red Eagle clutches with the 3/4 clutch pack that includes 8 clutches. This kit will include everything else you need to rebuild your 4L60E transmission. A new filter is included as well as a bushing kit and and thrust washer kit. The band in the kit is a high performance RedEagle band.

Alto Red Eagle^® material offers similar mid-point coefficient at high horsepower applications. In addition, the Alto Red Eagle® material gives superior friction wear characteristics at high energy engagements. The leading competitor's material degrades thermally and physically after reaching approximately 2.25 HP/in2. 

Below we offer some engineering data collected with this particular clutch.

Six Level High Energy Test
On Frictional Properties And Wear

Lbs./Sq. Inch Pressure Required To Stop Flywheel In One Second

NOTE: The Lower Lbs./Sq.In. Required to stop the flywheel, the higher the frictional properties.

Results: Pressure required to stop the flywheel on "ALTO RED EAGLE" are slightly lower than "Manufacturer A" and well below "Manufacturer B."

Conclusion: The frictional properties of "ALTO RED EAGLE" are slightly higher than "Manufacturer A" and well above "Manufacturer B."

Test Schedule and Duration:
Test conducted in six energy levels. Each level consists of 100 clutch engagements at 60 second intervals, from 4600 RPM with a clutch lockup time of one second, the indicated pressure required to stop the flywheel in one second.