SunCoast Diesel TH400 Rebuild Kit - 031901HPPWRSK
Description
This Kit Includes The Following:
- New vacuum modulator
- New high performance intermediate band
- New thrust washer Kit
- New bushing kit
- New filter
- New teflon seals
- New gasket and seal kit
- High performance Alto Red Eagle Power packs
- High performance Kolene Steels
This new TH400 rebuild kit comes with everything needed for your standard High Performace clutch and steel refresh for your TH400 with Alto Red Eagle clutches and Kolene Steels.
Alto Red Eagle® material offers similar mid-point coefficient at high horsepower applications. In addition, the Alto Red Eagle® material gives superior friction wear characteristics at high energy engagements. The leading competitor's material degrades thermally and physically after reaching approximately 2.25 HP/in2.
Below we offer some engineering data collected with this particular clutch.
Six Level High Energy Test
On Frictional Properties And Wear
Lbs./Sq. Inch Pressure Required To Stop Flywheel In One Second
Levels | Cycles | OEM Manufacturer A Pressure Required (Lbs./Sq.In.) |
OEM Manufacturer B Pressure Required (Lbs./Sq.In.) |
ALTO Red Eagle Pressure Required (Lbs./Sq. In.) |
---|---|---|---|---|
1 | 10 | 64 | 70 | 66 |
1 | 100 | 65 | 71 | 65 |
2 | 10 | 72 | 84 | 74 |
2 | 100 | 73 | 84 | 74 |
3 | 10 | 85 | 96 | 86 |
3 | 100 | 92 | 101 | 93 |
4 | 10 | 102 | 116 | 104 |
4 | 100 | 110 | 122 | 108 |
5 | 10 | 118 | 133 | 117 |
5 | 100 | 124 | 135 | 118 |
6 | 10 | 136 | 148 | 131 |
6 | 100 | 143 | 152 | 134 |
NOTE: The Lower Lbs./Sq.In. Required to stop the flywheel, the higher the frictional properties.
Results: Pressure required to stop the flywheel on "ALTO RED EAGLE" are slightly lower than "Manufacturer A" and well below "Manufacturer B."
Conclusion: The frictional properties of "ALTO RED EAGLE" are slightly higher than "Manufacturer A" and well above "Manufacturer B."
LEVELS | INERTIA (lb.-ft.2) | KINETIC ENERGY (lb.-ft.) |
---|---|---|
1 | .261 | 30,232 |
2 | .302 | 35,048 |
3 | .344 | 39,865 |
4 | .385 | 44,681 |
5 | .426 | 49,498 |
6 | .510 | 59,131 |
Test Schedule and Duration:
Test conducted in six energy levels. Each level consists of 100 clutch engagements at 60 second intervals, from 4600 RPM with a clutch lockup time of one second, the indicated pressure required to stop the flywheel in one second.
Details
- 031901HPPWRSK
- 031901HPPWRSK
- SunCoast Diesel
- New
Categories
Shipping Information
- Item Requires Shipping
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!